m‚Tn@The Cause of Bad Flocking by Flocking Equipment

@‚PDThe less circulation quantity of pile, the less Flocking.

@‚QDPile cling to an electrode for high voltage, and short-circuited.

@Our Blow Method Flocking Equipment is very simple in Flocking room and easy to clean in structure.You can keep watch inside of Flocking room from the outside.


m‚Un@The Problem of Bad Flocking in Winter

@‚PDPile will become dry in winter and Flocking condition will be bad, as stated already.

@‚QDWhy does humidity become low in winter? Air expands with heat by a natural phenomenon and by man. Then a relative humidity becomes low.

@‚RDThe above phenomenon is used for the reverse, and higher temperature than a flocking room 10-15Ž is made, and it swells air, and our humidifier humidifies there
. Then, it cuts down air, and relative humidity rises because it is sent to the flocking room and temperature is lowered in the flocking room. @

It becomes the same as pile reproduce, and the exchange of the pile isn't really necessary by the above system.

Šฃ‘‡˜F‚ฬ‰hi‹๓’ฒ‡Š@
TOP PREFACE COMPANY GUIDE
STATIC
FLOCKING
COATING DRY FURNACE AIR CONDITIONER


@@@@@@@@ @
@m‚Sn@The Cause of Bad Flocking by High Voltage Equipment.

@‚PDThe setting of High Voltage is a little different by length of pile and equipment or humidity. Just for your information, refer to the followings for settings of a rough estimate.

@@@‚Dthe relation between the distance of electrodes and the voltage@|||||@10,000v/25`35mm

@@@‚‚Dvoltage @@@@@@@ @@ @@ @ |||||@@‚P‚TC‚O‚O‚O@`@‚Q‚TC‚O‚O‚O‚u

@@@‚ƒDhigh-voltage current @@@@@@|||||@@‚Q‚O‚O@`@‚PC‚O‚O‚Oƒส‚`

@@@@@–High voltage current value is different by a shape of electrode, quantity of pile and humidity.

@‚QDOur High Voltage Equipment is superior in high speed safety by control system, which we developed.

@‚RDHigh voltage electrode is the special shape which is the pile concentrates on the things